Tesla Model Y Rear Door Flare Clear Bra (2020-2023)
Protect the rear impact areas on the flared rear doors with our 'pre cut' ready to apply arced sections. Similar in concept to the factory accessory item you can get from Tesla from time to time but a different design and produced using self healing 3M Scotchgard Pro Series Paint Protection Film rather than a non-self healing / OEM grade material.
They have an arced leading edge design and measure about 12 inches long (along the bottom edge of the door). They extend up about 15 inches from the lower rear corner of the door up the flared out trailing edge. Measuring diagonally at about a 45 degree angle from the lower rear corner of the door toward the center of the door they measure about 12 inches deep.
We installed these here in TX and now offer the same kit to you. Cut from 3M's self healing Scotchgard Pro Series for years of protection!
DIY Install Videos:
DIY PPF Install Video Collection
What does the kit include?
- Left and right side large sections for the rear areas of the rear doors.
- Detailed written application instructions.
What else will I need to apply this? (not included)
- 2 All Purpose Spray Bottles 16 or 32 oz
- Water - Distilled preferred but tap will work
- 70% Isopropyl Alcohol
- Johnson and Johnson 'Baby Shampoo' or 'Head-to-Toe' Soap
- 'Turbo' Type Squeegee (available HERE)
- Microfiber Towels (available HERE)
- Positive attitude
